Effect of electron irradiation on alternating current electrical properties of gelatin – cadmium sulfide nano-composite films

Gelatin was doped with 1 %, 3 %, 5 % and 10 % cadmium sulfide nanoparticles in weight concentrations forming the gelatin-cadmium sulfide nanocomposites and irradiated by various electron beam doses equals 50 kGy, 75 kGy, 100 kGy, and 150 kGy using 3 MeV – 3 mA electron accelerator. The applied alternating current electrical field frequency ranging from 70 Hz to 5 MHz is what caused the fluctuation in dielectric properties and alternating current electrical conductivity of these nanocomposites. The results showed that the films of 1 %, 3 %, 5 %, and 10 % for blank (nanocomposite film without electron beam irradiation) nanocomposites had the highest dielectric parameters (έ, ϵ′′, tan δ) at 0.5 kHz with values of (0.696, 0.0233, 0.034), (0.533, 0.0114, 0.0215), (0.402, 0.001196, 0.003), and (0.459, 0.00418, 0.0091), respectively. However, the lowest dielectric parameters were (0.645, 0.00618, 0.0066), (0.523, 0.00165, 0.0215), (0.417, 0.00035, 0.0008), and (0.455, 0.00066, 0.0015) at 5 MHz, respectively. The highest conductivity values for blank nanocomposites of 1 %, 3 %, 5 %, and 10 % were 1.79×10⁻⁴ S/m, 1.45×10⁻⁴ S/m, 1.16×10⁻⁴ S/m, 1.27×10⁻⁴ S/m at 5 MHz, and the lowest values were 1.92×10⁻⁸ S/m, 1.49×10⁻⁸ S/m, 1.13×10⁻⁸ S/m, 1.26×10⁻⁸ S/m at 0.5 kHz, respectively. For irradiated nanocomposites at 5 MHz, the dielectric constant order for 1 % was 100 kGy, 150 kGy, 50 kGy, and 75 kGy with values 0.63, 0.537, 0.532, and 0.523, respectively. For 10 % weight concentration, the order was 50 kGy, 100 kGy, 150 kGy, and 75 kGy with values 0.515, 0.477, 0.47, and 0.437, respectively. Otherwise the dielectric constant order for 3 % and 5 % was 100 kGy, 75 kGy, 150 kGy, and 50 kGy. The highest dielectric properties and conductivity values for blank and irradiated nanocomposites were observed at 100 kGy for 1 %, 3 %, and 5 %.     

Data envelopment analysis with classification and regression tree – a case of banking efficiency

Abstract: Data envelopment analysis (DEA) is a non‐parametric method for measuring the efficiency and productivity of decision‐making units (DMUs). On the other hand data mining techniques allow DMUs to explore and discover meaningful, previously hidden information from large databases. Classification and regression (C&R) is the commonly used decision tree in data mining. DEA determines the efficiency scores but cannot give details of factors related to inefficiency, especially if these factors are in the form of non‐numeric variables such as operational style in the banking sector. This paper proposes a framework to combine DEA with C&R for assessing the efficiency and productivity of DMUs. The result of the combined model is a set of rules that can be used by policy makers to discover reasons behind efficient and inefficient DMUs. As a case study, we use the proposed methodology to investigate factors associated with the efficiency of the banking sector in the Gulf Cooperation Council countries.     

Analysis of Pipe Networks by the Finite Element Method

ABSTRACT

In this paper, the finite element technique used in the analysis and design of water distribution networks will be presented. The method was applied successfully to the solution of three different networks.

In order to demonstrate the feasibility of the approach and to show some merits and demerits of the finite element method, a comparison was made on a digital computer with the standard Hardy Cross method. In all cases the finite element method was shown to provide superior performance.

Moreover, the programmes were run on three different machines [Wang vs 100, Apple IIe, and IBM micro-computer] to show the effect of increasing storage capacity, machine accuracy, and time saving.     

Core–shell structured Cu@Pt nanoparticles as effective electrocatalyst for ethanol oxidation in alkaline medium

Core–shell nanoparticles of Cu@Pt/C electrocatalysts were synthesized using various Pt:Cu atomic ratios with NaBH₄ as a reducing agent. The crystal structure and surface morphology were studied using X-ray diffraction (XRD) and transmission electron microscopy (TEM). The incorporation of copper in Cu@Pt/C electrocatalysts was found to shift all Pt diffraction planes in the negative direction with expanding the crystal lattice dimensions. The electrocatalytic activity of various Cu@Pt/C electrocatalysts was investigated using cyclic voltammetry, chronoamperometry and electrochemical impedance spectroscopy. Cu@Pt/C electrocatalysts containing Pt:Cu atomic ratios of 1:0.5 and 1:2 showed an enhanced electrochemical performance for ethanol oxidation when related to Pt/C.     

Electrical double-layer capacitors: evaluation of ageing phenomena during cycle life testing

This paper represents an assessment of the main ageing phenomena in electrical double-layer capacitors (EDLCs). In this study the cycle life of the EDLC cells with a rated capacitance of 1,600 F has been investigated at different ambient temperatures and current rates. From the experimental results we can observe that the impact of the high ambient temperature is significant on the cycle life of the cells. Moreover, the results also show the negative impact of the current rate. The internal resistance tests showed that the increase of the resistance is much higher than the decrease of the capacitance. Thus, the ageing of the EDLC during cycling was clearly non-linear. Further the EIS measurements indicated the higher increase of the imaginary part of the impedance at low frequencies during cycling, which indicates the capacitance fade.     

Co-doping effects of (Al,Ti, Mg) on the microstructure and electrical behavior of ZnO-based ceramics

Co-doped ZnO-based ceramics using Al, Ti, and Mg ions in different ratios were synthesized with the objective to investigate the doping effects on the crystalline features, microstructure and the electrical behavior. For Al and Ti doping, a coexistence of crystalline phases was shown with a major wurtzite ZnO structure and secondary spinel phases (ZnAl₂O₄, Zn₂TiO₄, or Zn_aTi_bAl_cO_d), while Mg doping did not alter significantly the structural features of the wurtzite ZnO phase. The electrical behavior induced by Al, Ti, and Mg co-doping in different ratios was investigated using Raman, electron paramagnetic resonance (EPR) and ²⁷Al and ⁶⁷Zn solid-state nuclear magnetic resonance (NMR). Al doping induces a high electrical conductivity compared to other doping elements. In particular, shallow donors from Zn_i-Al_Zn defect structures are inferred from the characteristic NMR signal at about 185 ppm; that is, quite far from the usual oxygen coordinated Al. The Knight shift effect emanating from a highly conducting Al-doped ZnO ceramics was considered as the origin of this observation. Oppositely, as Ti doping leads to the formation of secondary spinel phases, EPR analysis shows a high concentration of Ti³⁺ ions which limit the electrical conductivity. The correlation between the structural features at the local order, the involved defects and the electrical behavior as function of the doping process are discussed.     

Enhancement of biohydrogen production from sustainable orange peel wastes using Enterobacter species isolated from domestic wastewater

Five facultative anaerobic bacterial isolates were recovered from domestic wastewater. These isolates were identified based on the 16S rRNA as Enterobacter aerogenes (one isolate), Enterobacter cloacae (two isolates), and Cronobacter sakazakii (three isolates). These isolates were examined for their potential to evolve hydrogen on a glucose medium. The most potent hydrogen‐producing isolates, E aerogenes (KY549389) and E cloacae (KY524293), were examined for their capacity to generate hydrogen, acetone, butanol, and ethanol using orange peel (OP) hydrolysate. OP powder was pretreated with n‐hexane to remove the toxicity of d ‐limonene. Different concentrations (4%, 6%, and 8% w/v) of limonene‐free OP were subjected to the boiling water (temperature of 100°C) or acid (HCl) treatments. The maximum fermentative H₂ production of 1700 and 1620 mL/L was obtained from 6% OP hydrolysate extracted with boiling water using facultative anaerobic E aerogenes (KY549389) and E cloacae (KY524293), respectively. Hydrogen production efficiency was 0.99 and 1.19 mol H₂/mol glucose for E aerogenes and E cloacae, respectively. The total fermentative acetone, butanol, and ethanol (ABE) generated by E aerogenes and E cloacae were 0.78 and 0.38 g/L including acetone (0.05 and 0.04 g/L), butanol (0.011 and 0.013 g/L), and ethanol (0.71 and 0.32 g/L), respectively. The maximum ABE productivity was 0.01 and 0.005 g/L/h generated at 60 g/L OP hydrolysate by E aerogenes and E cloacae, respectively. These strains were positive for nitrogen fixation (nitrogenase) capability estimated by the acetylene reduction assay. Application of OP hydrolysate without the addition of any nutritional components or reducing agent is considered an eco‐friendly, economical, and commercial substrate for desired biofuel production.